BenQ W1070 Firmware Update

안녕하세요 크아입니다.

얼마 전 이사를 하면서 프로젝터를 천장에서 떼어내는 김에 펌웨어 업데이트를 시도해 보았습니다.

제 프로젝터는 W1070으로 나름(?) 가성비가 좋은 제품이라고 생각되는 제품인데요.

1.08 펌웨어 파일을 못찾아서 엄청 해매다가 어렵게 구해서 펌웨어를 하였는데

결과는 대 만족입니다.

기존 1.06 펌웨어가 HDMI 찾는 속도 향상으로 인해 초기 구동에 만족했다면

이번 1.08 펌웨어 업데이트는 소음을 잡았네요.

기존보다 팬소리가 조용하여 검색 해보니 역시나 Fan noise 관련 업데이트 였습니다.

노이즈가 말도 안되게 조용해졌다 정도의 수준은 아니지만  

확실히 줄어들어서 기존 경쟁 제품들과 비슷한 수준 정도가 된 것 같습니다.

팬 도는 소리가 확실히 다릅니다~~!!!!

여건 되시는 분들은 한번 해보시는 것은 어떠신지요?^^

Firmware 1.03

Problem-1- To improve the flickering when smart ECO mode + dynamic setting
Problem-2- To add “Background” color in OSD

Firmware 1.04

Problem-1- When at low temperature environment, fan oil would become thickened, cause rotational speed of
fan can’t reach target then shut down.
Problem-2- Keystone bug: When playing 3D (Frame packing), and then switch to 2D, and keystone value
can’t be kept.

Firmware 1.05

Problem-1- ISF setting cannot be saved
Problem-2- compatibility problem for some unique 3D DVD players(Philips)
Problem-3- OSD Swedish language of ”on& off” wrong translation


Firmware 1.06

Fixes:
-1- Hg bridge problem symptom: can’t turn on a projector, but NDF after transportation; few cases found in BQC.
There is Hg (Mercury) in a lamp bulb. Whenever the liquid mercury make the Short-circuit of electrodes of the lamp, the unit can’t
be turn on. To change the cooling status and lamp ignition behavior can make mercury condense at different locations of a bulb.
Due to Hg (Mercury) changing the location in lamp bulbs during transportation, it will be NDF in ASP.
-2- To improve power-on while system initializing
-3- To improve Philips DVD compatibility issue(BQC)
-4- Add 3D format as appendix
-5- Adjust Audio Curve for BQjp
-6- Japanese OSD correction for Cool and Warm (BQjp)
-7- To enhance HDMI searching speed
-8- To update RC code for new remote RCV011
-9- To modify the gain value to improve HDMI signal searching ability
-10- To add model name W1250 in Factory OSD (only W1070)

Added support for 3D formats:
1280x720p@59/94/60 Hz -- SBS added
1280x720p@50Hz - SBS added
1920x1080p@23.98/24Hz - SBS added
1920x1080p@59.94/60Hz - Top Bottom - added
1920x1080p@50Hz - Top Bottom - added

Firmware 1.07

ISF Night setting can’t be keep after 2D->3D timing changed
To keep lamp hour after “reset all setting in USE OSD”
To improve the 32 gray level via PS3 HDMI
Modify picture mode of “power off” icon
Modify HSG setting in No signal condition

Firmware 1.08
– Noise improvement / 1080p greenish problem via HDMI/VGA signal.
– Add 3D support timing: 1080p 60Hz SBS